ABSTRACT
BACKGROUND@#Previously, the authors modified the surgical technique to preserve tibial bone mass for Oxford unicompartmental knee arthroplasty (UKA). The purpose of this study was to determine the clinical outcomes and values of this modified technique.@*METHODS@#Clinical data of 34 consecutive patients who underwent the unilateral modified UKA technique (modified group, 34 knees) were retrospectively analyzed. To compare the outcome, a match-paired control group (conventional group, 34 knees) of an equal number of patients using the conventional technique system in the same period were selected and matched with respect to diagnosis, age, pre-operative range of motion (ROM), and radiological grade of knee arthrosis. Clinical outcomes including knee Hospital for Special Surgery (HSS) score, ROM, and complications were compared between the two groups. Post-operative radiographic assessments included hip-knee-ankle angle (HKA), joint line change, implant position, and alignment.@*RESULTS@#The mean follow-up time was 38.2 ± 6.3 months. There was no difference in baseline between the two groups. The amount of proximal tibial bone cut in the modified group was significantly less than that of the conventional group (4.7 ± 1.1 mm vs. 6.7 ± 1.3 mm, t = 6.45, P < 0.001). Joint line was elevated by 2.1 ± 1.0 mm in the modified group compared with -0.5 ± 1.7 mm in the conventional group (t = -7.46, P < 0.001). No significant differences were observed between the two groups after UKA with respect to HSS score, VAS score, ROM, and HKA. Additionally, the accuracy of the post-operative implant position and alignment was similar in both groups. As for implant size, the tibial implant size in the modified group was larger than that in the conventional group (χ = 4.95, P = 0.035).@*CONCLUSIONS@#The modified technique for tibial bone sparing was comparable with the conventional technique in terms of clinical outcomes and radiographic assessments. It can preserve tibial bone mass and achieve a larger cement surface on the tibial side.
ABSTRACT
Background@#Previously, the authors modified the surgical technique to preserve tibial bone mass for Oxford unicompartmental knee arthroplasty (UKA). The purpose of this study was to determine the clinical outcomes and values of this modified technique.@*Methods@#Clinical data of 34 consecutive patients who underwent the unilateral modified UKA technique (modified group, 34 knees) were retrospectively analyzed. To compare the outcome, a match-paired control group (conventional group, 34 knees) of an equal number of patients using the conventional technique system in the same period were selected and matched with respect to diagnosis, age, pre-operative range of motion (ROM), and radiological grade of knee arthrosis. Clinical outcomes including knee Hospital for Special Surgery (HSS) score, ROM, and complications were compared between the two groups. Post-operative radiographic assessments included hip-knee-ankle angle (HKA), joint line change, implant position, and alignment.@*Results@#The mean follow-up time was 38.2 ± 6.3 months. There was no difference in baseline between the two groups. The amount of proximal tibial bone cut in the modified group was significantly less than that of the conventional group (4.7 ± 1.1 mm vs. 6.7 ± 1.3 mm, t = 6.45, P < 0.001). Joint line was elevated by 2.1 ± 1.0 mm in the modified group compared with -0.5 ± 1.7 mm in the conventional group (t = -7.46, P < 0.001). No significant differences were observed between the two groups after UKA with respect to HSS score, VAS score, ROM, and HKA. Additionally, the accuracy of the post-operative implant position and alignment was similar in both groups. As for implant size, the tibial implant size in the modified group was larger than that in the conventional group (χ2 = 4.95, P = 0.035).@*Conclusions@#The modified technique for tibial bone sparing was comparable with the conventional technique in terms of clinical outcomes and radiographic assessments. It can preserve tibial bone mass and achieve a larger cement surface on the tibial side.
ABSTRACT
<p><b>BACKGROUND</b>The quality of the lateral compartment cartilage is important to preoperative evaluation and prognostic prediction of unicompartmental knee arthroplasty (UKA). Delayed gadolinium-enhanced magnetic resonance imaging of cartilage (dGEMRIC) enables noninvasive assessment of glycosaminoglycan (GAG) content in cartilage. This study aimed to determine the GAG content of the lateral compartment cartilage in knees scheduled to undergo Oxford medial UKA.</p><p><b>METHODS</b>From December 2016 to May 2017, twenty patients (20 osteoarthritic knees) conforming to the indications for Oxford medial UKA were included as the osteoarthritis (OA) group, and 20 healthy volunteers (20 knees) paired by sex, knee side, age (±3 years), and body mass index (BMI) (±3 kg/m2) were included as the control group. The GAG contents of the weight-bearing femoral cartilage (wbFC), the posterior non-weight-bearing femoral cartilage (pFC), the lateral femoral cartilage (FC), and tibial cartilage (TC) were detected using dGEMRIC. The dGEMRIC indices (T1Gd) were calculated in the middle three consecutive slices of the lateral compartment. Paired t-tests were used to compare the T1Gd in each region of interest between the OA group and control group.</p><p><b>RESULTS</b>The average age and BMI in the two groups were similar. In the OA group, T1Gd of FC and TC was 386.7 ± 50.7 ms and 429.6 ± 59.9 ms, respectively. In the control group, T1Gd of FC and TC was 397.5 ± 52.3 ms and 448.6 ± 62.5 ms, respectively. The respective T1Gd of wbFC and pFC was 380.0 ± 47.8 ms and 391.0 ± 66.3 ms in the OA group and 400.3 ± 51.5 ms and 393.6 ± 57.9 ms in the control group. Although the T1Gd of wbFC and TC tended to be lower in the OA group than the control group, there was no significant difference between groups in the T1Gd in any of the analyzed cartilage regions (P value of wbFC, pFC, FC, and TC was 0.236, 0.857, 0.465, and 0.324, respectively).</p><p><b>CONCLUSIONS</b>The GAG content of the lateral compartment cartilage in knees conforming to indications for Oxford medial UKA is similar with those of age- and BMI-matched participants without OA.</p>
ABSTRACT
<p><b>BACKGROUND</b>Lateral compartmental osteoarthritis (LCOA), a major complication after medial mobile-bearing unicompartmental knee arthroplasty (UKA), is highly associated with the increased stress of the lateral compartment. This study aimed to analyze the effects on the stress and load distribution of the lateral compartment induced by lower limb alignment and coronal inclination of the tibial component in UKA through a finite element analysis.</p><p><b>METHODS</b>Eight three-dimensional models were constructed based on a validated model for analyzing the biomechanical effects of implantation parameters on the lateral compartment after medial Oxford UKA: postoperative lower limb alignment of 3° valgus, neutral and 3° varus, and the inclination of tibial components placed in 4°, 2° valgus, square, and 2° and 4° varus. The contact stress of femoral and tibial cartilage and load distribution were calculated for all models.</p><p><b>RESULTS</b>In the 3° valgus lower limb alignment model, the contact stress of femoral (3.38 MPa) and tibial (3.50 MPa) cartilage as well as load percentage (45.78%) was highest compared to any other model, and was increased by 36.75%, 47.70%, and 27.63%, respectively when compared to 3° varus. In the condition of a neutral position, the outcome was comparable for the different tibial tray inclination models. The inclination did not greatly affect the lateral compartmental stress and load distribution.</p><p><b>CONCLUSIONS</b>This study suggested that slightly varus (undercorrection) lower limb alignment might be a way to prevent LCOA in medial mobile-bearing UKA. However, the inclination (4° varus to 4° valgus) of the tibial component in the coronal plane would not be a risk factor for LCOA in neutral position.</p>
ABSTRACT
<p><b>BACKGROUND</b>The lateral pillar of the femoral head is an important site for disease development such as osteonecrosis of the femoral head. The femoral head consists of medial, central, and lateral pillars. This study aimed to determine the biomechanical effects of early osteonecrosis in pillars of the femoral head via a finite element (FE) analysis.</p><p><b>METHODS</b>A three-dimensional FE model of the intact hip joint was constructed from the image data of a healthy control. Further, a set of six early osteonecrosis models was developed based on the three-pillar classification. The von Mises stress and surface displacements were calculated for all models.</p><p><b>RESULTS</b>The peak values of von Mises stress in the cortical and cancellous bones of normal model were 6.41 MPa and 0.49 MPa, respectively. In models with necrotic lesions in the cortical and cancellous bones, the von Mises stress and displacement of lateral pillar showed significant variability: the stress of cortical bone decreased from 6.41 MPa to 1.51 MPa (76.0% reduction), while cancellous bone showed an increase from 0.49 MPa to 1.28 MPa (159.0% increase); surface displacements of cortical and cancellous bones increased from 52.4 μm and 52.1 μm to 67.9 μm (29.5%) and 61.9 μm (18.8%), respectively. In addition, osteonecrosis affected not only pillars but also adjacent structures in terms of the von Mises stress and surface displacement levels.</p><p><b>CONCLUSIONS</b>This study suggested that the early-stage necrosis in the femoral head could increase the risk of collapse, especially in lateral pillar. On the other hand, the cortical part of lateral pillar was found to be the main biomechanical support of femoral head.</p>
ABSTRACT
<p><b>BACKGROUND</b>Controversies about the rational positioning of the tibial component in unicompartmental knee arthroplasty (UKA) still exist. Previous finite element (FE) studies were rare, and the results varied. This FE study aimed to analyze the influence of the tibial component coronal alignment on knee biomechanics in mobile-bearing UKA and find a ration range of inclination angles.</p><p><b>METHODS</b>A three-dimensional FE model of the intact knee was constructed from image data of one normal subject. A 1000 N compressive load was applied to the intact knee model for validating. Then a set of eleven UKA FE models was developed with the coronal inclination angles of the tibial tray ranging from 10° valgus to 10° varus. Tibial bone stresses and strains, contact pressures and load distribution in all UKA models were calculated and analyzed under the unified loading and boundary conditions.</p><p><b>RESULTS</b>Load distribution, contact pressures, and contact areas in intact knee model were validated. In UKA models, von Mises stress and compressive strain at proximal medial cortical bone increased significantly as the tibial tray was in valgus inclination >4°, which may increase the risk of residual pain. Compressive strains at tibial keel slot were above the high threshold with varus inclination >4°, which may result in greater risk of component migration. Tibial bone resection corner acted as a strain-raiser regardless of the inclination angles. Compressive strains at the resected surface slightly changed with the varying inclinations and were not supposed to induce bone resorption and component loosening. Contact pressures and load percentage in lateral compartment increased with the more varus inclination, which may lead to osteoarthritis progression.</p><p><b>CONCLUSIONS</b>Static knee biomechanics after UKA can be greatly affected by tibial component coronal alignment. A range from 4° valgus to 4° varus inclination of tibial component can be recommended in mobile-bearing UKA.</p>
Subject(s)
Adult , Humans , Male , Arthroplasty, Replacement, Knee , Methods , Finite Element Analysis , Knee Joint , General Surgery , Stress, Mechanical , Tibia , General Surgery , Treatment OutcomeABSTRACT
<p><b>BACKGROUND</b>It was reported that combination of mycophenolate mofetil (MMF) and enalapril could reduce proteinuria, improve renal function, and down-regulate diabetes-induced macrophage recruitment and expression of monocyte chemotactic protein 1 (MCP-1) and transforming growth factor beta (TGF-beta) in diabetic renal tissue. But there are no compelling data available for the combination of MMF and angiotensin converting enzyme inhibitor (ACEI) for suppressing tubulointerstitial fibrosis in chronic kidney diseases. The present study was to disclose the effect of MMF combined with benazapril on delaying tubulointerstitial fibrosis and its possible mechanisms in 5/6 nephrectomized rats.</p><p><b>METHODS</b>Fifty male SD rats underwent 5/6 nephrectomy (5/6 NX) were randomized into the following groups: NX (5/6 nephrectomized rats, distilled water, n = 10), MMF (MMF 20 mg x kg(-1) x d(-1), p.o., n = 10), Ben (benazepril 10 mg x kg(-1) x d(-1), p.o., n = 10), MMF/Ben (MMF 20 mg x kg(-1) x d(-1), p.o., and benazapril 10 mg x kg(-1) x d(-1), p.o., n = 10). They were monitored for proteinuria and systolic blood pressure every two weeks. After 8 weeks of treatment, serum creatinine and blood urea nitrogen were assayed and pathological damage to the kidney were evaluated. Renal expression and serum levels of platelet-derived growth factor-BB (PDGF-BB), matrix metalloproteinase-9 (MMP-9), and tissue inhibitor of metaloproteinase-1 (TIMP-1) were detected by immunohistochemistry and ELISA methods.</p><p><b>RESULTS</b>After 8 weeks of treatment, 24-hour proteinuria, serum creatinine and blood urea nitrogen were significantly lower in treated groups compared with the untreated rats. MMF and benazepril combination therapy had a greater effect than either drug alone. MMF alone had no effect on systolic blood pressure, but benazapril and MMF/benazapril could significantly reduce blood pressure. Rats that underwent 5/6 nephrectomy had greater tubulointerstitial inflammatory cell infiltration and collagen accumulation than sham-operated rats; all treatments, especially MMF/benazepril, ameliorated these effects. Tubules in 5/6 nephrectomized rats expressed higher levels of PDGF-BB and TIMP-1 and lower MMP-9 compared with sham-operated rats. MMF and benazepril similarly reversed these phenomenons and combination therapy almost completely restored the expression of these cytokines in renal tissue and their plasma concentration.</p><p><b>CONCLUSIONS</b>MMF, especially combined with benazepril, can reduce proteinuria, improve renal function, ameliorate tubulointerstitial fibrosis in 5/6 nephrectomized rats. These effects might be, in part, associated with down-regulation of PDGF-BB and TIMP-1, and MMP-9 up-regulation in renal tissues.</p>
Subject(s)
Animals , Male , Rats , Benzazepines , Therapeutic Uses , Enzyme-Linked Immunosorbent Assay , Immunohistochemistry , Immunosuppressive Agents , Therapeutic Uses , Matrix Metalloproteinase 9 , Metabolism , Mycophenolic Acid , Therapeutic Uses , Nephrectomy , Nephritis, Interstitial , Drug Therapy , Metabolism , Pathology , Platelet-Derived Growth Factor , Metabolism , Proto-Oncogene Proteins c-sis , Rats, Sprague-Dawley , Tissue Inhibitor of Metalloproteinase-1 , MetabolismABSTRACT
A series of aromatic aminoketones were synthesized by Mannich reaction. Structures of these compounds were confirmed by 1H NMR, MS and HRMS or element analysis. Pharmacological screening showed that most target compounds inhibited the release of beta-glucuronidase in polymorphonuclear leucocytes by PAF (platelet activating factor) and compounds MA12, MA13, MA18, MA21 and MA33 were more active. The study suggests that target compounds are potential PAF receptor antagonists and their anti-inflammatory activities are due to the inhibition of release of lysosomal enzyme.